Most Used Parameter List - Safeline MX3+ Guia De Inicio Rapido

Most used parameter list

- for full list see installation manual
Configuration
Enter configuration mode
Enter password
Exit configuration mode
Alarm
P100 ID code
CPC ID code
Q23 ID code
Telephone numbers
1st Phone number
2nd Phone number
3rd Phone number
4th Phone number
Call type
Call type 1st number
Call type 2nd number
Call type 3rd number
Call type 4th number
Call type LMS number
Test alarm/battery alarm
LMS phone number
Test alarm
Days between tests
Test alarm protocol
Code Data
00
* - - - - #
*00*#
Code Data
*01* - - - - - - - - #
*02* - - - - - - #
*03* - - - - - - - - -- - #
Code Data
*11* - - - - - - - - - #
*12* - - - - - - - - - #
*13* - - - - - - - - - #
*14* - - - - - - - - - #
Code Data
*21* - #
*22* - #
*23* - #
*24* - #
*30* - #
Code Data
*16* - - - - - - - - - #
*17* - - - - - - - - - #
*27* - - #
*31* - #
25
Comments
Default = 0000
Comments
P100 is always 8 digits
CPC 6-8 digits
Q23 is always 12 digits
Comments
Phone number to alarm receiver: 1-20
digits. Each asterisk (*) is equal to one
second delay.
Example #1: *11*0**1234567#
Example #2: *11*# deletes the phone
number.
Comments
0 = P100
1 = VOICE (default)
2 = Q23
3 = CPC
0 = P100
3 = CPC (Only battery alarm)
Comments
LMS (Lift Monitoring System) phone number
to alarm receiver or SLCC.
Phone number to test alarm receiver or
SLCC.
Number of days between test alarms, 00-99
days.
Always two digits.
0 = P100
3 = CPC
4 = Caller ID
p.13
English