1.
!(STOP) use this button to stop playing..
2.
CD/USB use this button to select CD or USB mode.
(PLAY/PAUSE) use this button start playing or pause playing.
3.
FOLDER + use this button to skip to the next folder.
4.
5.
PROG use this button to program the track in the desired order.
"
(SKIP UP) use this button to skip to the next track.
6.
7.
FOLDER use this button to skip back to the previous folder.
8.
MODE use this button to select the playback mode.
#
(SKIP DN) use this button to skip back to the previous track.
9.
Warning:
When the remote will not be used for a long time, remove the batteries in order to prevent damage due
to electrolyte leakage.
CARE AND MAINTENANCE
Always turn off the unit after use.
Keep the unit away from magnetic objects, water or heat sources.
Use a clean soft cloth moistened with lukewarm water to clean the cabinet. Never use chemical
cleaners that could damage the finish of the unit.
Never touch the CD pickup and lens. If fingerprints get on the pickup lens, clean it gently with a
commercial lens cleaner.
Disconnect the unit from any power sources before cleaning.
To remove a disc from its storage case, press down on the centre of the case and lift the disc out,
holding it carefully by the edges.
Fingerprints and dust should be carefully wiped off the disc's recorded surface with a soft cloth.
Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris
so gently wiping with a soft cloth should remove most particles. Wipe in a straight line from the inside
to the outside of the disc. Small dust particles and light stains will have absolutely no effect on
reproduction quality.
Never use chemicals such as record sprays, anti-static sprays, benzene or thinners to clean compact
discs. These chemicals can irreparably damage the disc's surface.
Discs should be returned to their cases after use. This avoids serious scratches that could cause the
Laser pickup to skip.
Do not expose discs to direct sunlight, high humidity, or high temperatures for extended periods.
Long exposure to high temperatures can warp the disc.
Do not stick paper or write anything with a ballpoint pen on the label side of the disc.
SPECIFICATIONS
Frequency Range:
Audio Output Power
Power Supply:
P-6
AM 540 - 1600 KHz
FM 88 - 108 MHz
1.2W x 2
AC 110/220V ~ 60/50 Hz
DC 9V
(UM-2 x 6)