Tabla de contenido
Idiomas disponibles
Idiomas disponibles
4. Repeat steps 2 to 3 to store more tracks in the memory. For CD disc, you can store up to 20 tracks in
the memory and for MP3 files, you can store up to 99 tracks in the memory..
5. Press the
button to start playing the disc in the programmed order.
6. To stop playing, press the
7. To cancel the programming list, press the STOP button and open the CD compartment door or select
a different function OFF/AUX or RADIO.
In case of Playing MP3
All procedure is same as Audio CD. But if you have directory in your disc, you can select folder and track
both.
AUX/MP3-IN CONNECTION
1. Insert one side of the audio cable (requires 3.5mm stereo plug, not supplied) into the line-out jack or
phones jack on your MP3 player and the other side to the aux-in jack on the unit.
2. Turn on the unit and slide the function selector to OFF/AUX position.
3. Turn on your MP3 player and follow the playback instruction.
4. To stop this function, simply turned off your MP3 player.
Note:
Because of non-standardized format definition/production of MP3 format, playback quality &
performance are not guaranteed.
Manufacturer is not responsible for the playability of MP3 in any case due to recording conditions such
as PC performance, writing software, media ability and etc.
REMOTE CONTROL
Take off the plastic sheet located at the battery compartment tray to activate the remote control.
Point the remote control at the remote sensor. The functions of the buttons on the remote control are
same as the corresponding controls on the main unit. The remote can only control the CD or USB
operation.
!
button.
!
1
(STOP) button
2
CD/USB button
3
(PLAY/PAUSE) button
4
FOLDER+ button
5
PROG. button
"
6
(SKIP UP) button
7
FOLDER button
8
MODE button
#
9
(SKIP DN) button
P-5
Tabla de contenido
