!
Warning!
Severe electrical shock hazard or
danger of electrocution!
– Do not place arium
top of electrical equipment.
Routine maintenance of this unit
may involve water spillage and
subsequent electrical shock hazard,
if located improperly.
!
Warning!
Danger of fire or explosion!
– Do not use in the presence
of flammable or combustible
materials; fire or explosion
may result. This device contains
components which may ignite
such materials.
– Place the arium
®
system on a
flat surface.
– Ensure that a feed water supply
(pre-pressure minimum 1.2 bar and
maximum 6.8 bar), an atmospheric
drain and a suitable power supply
(100–240 VAC, 50–60 Hz) are
available.
Bench Mounting
Place the system on a suitable
workbench. Make sure that the
specified bench space is available
and that the surface supports the
system's operating weight 20 kg
(44 Ib).
10
®
61316 on
1. Fasten the bracket to the wall with
2. Loosen the metal support (4) using
3. Push the arium
4. Slide the metal support (4) to the
!
– Inury or equipment damage could
Wall Mounting
A wall bracket (2) allow you to
attach the system securely to
the wall with a minimum amount
of space. A clear wall area of
63 + 63 cm is required to mount
the arium
®
system. Two sturdy
keyholes (1) are located at the
top of the back of the housing to
enable you to hang the unit on the
wall bracket using two screws (5).
Use the predrilled holes in the
bracket to fasten the bracket to
the wall. The metal profile (6)
®
located on the lower arium
housing functions as a spacer.
Note!
The wall mounting bracket and the
required screws are not included
in the standard equipment supplied
with the unit. These have to be
ordered separately.
suitable screws and dowels.
the screw (3) and slide the support
to the left.
®
system onto
the pins and lower the system
to engage the keyholes (1).
right until the metal support rests
against the arium
®
housing and
lock it using the screw (3).
Warning!
The reverse osmosis system oper-
ating weight is more than 20 kg
(44 Ib). Make sure that the wall is
stable enough for mounting the
system.
occur if the system is not mounted
properly.
arium
®
backside with keyholes
and spacer
Wall bracket