Worx WG206 Manual Original De Instrucciones página 8

19. Heavy duty gloves should always be worn
when using the Hedge trimmer.
20. Be careful during adjustment of placing
your fingers between moving blades and
fixed parts of the machine.
21. During transportation and storage of the
Hedge trimmer, keep the blades covered at
all times with the blade sheath.
22. The use of a Residual Current Device
(R.C.D.) with a tripping current of not more
than 30mA is recommended.
23. Do not try to grasp or remove hedge
clippings when the hedge trimmer is
running. Only remove hedge clippings
when the appliance is switched off and
disconnected from the power supply.
24. Carry the hedge trimmer at the handle
while the cutter blade is not running.
Always ensure guard supplied is fitted
when transporting or storing the hedge
trimmer. Careful operation reduces the
injury by the cutter blade.
25. Keep power cord away from the cutting
area. Be aware that during operation the
cable may be covered in hedge clippings
and could be cut inadvertently.
08 08
Hedge Trimmer
OPeRATInG InSTRUCTIOnS
NOTe: Before using the tool, read the
instruction book carefully.
WaRNING! Do not use the product
without fitting the guard.
1. asseMbLY Of THe GUaRd (see fig a)
Insert the guard into the slot as illustrated in
Fig A, and use two screws to fix the guard
securely.
2. POWeR cORd ReTeNTION cLIP (see
fig b)
For strain relief of the power cord, form a loop
of the end of the cord and bring it through the
opening in the handle. Wrap the loop around
the retention clip.
3. sTaRTING aNd sTOPPING (see fig c)
befORe sTaRTING YOUR HedGe
TRIMMeR
Remove blade sheath (7) as illustrated in Fig D.
TO sTaRT YOUR HedGe TRIMMeR
There are two switch levers fitted in your
Hedge trimmer (2&4).
Simultaneously depress both switch levers for
the product to start. Depress and hold the front
switch lever (4) and rear switch lever (2).
TO sTOP YOUR HedGe TRIMMeR
Move Hedge trimmer away from cutting area
before stopping.
To stop, release one of the switch levers.
WaRNING: If any parts are missing,
damaged or broken, do not operate your
Hedge trimmer until all damaged parts have
been replaced or repaired. Failure to do so
could result in serious personal injury.
4. HOW TO Use YOUR HedGe TRIMMeR
Inspect the area to be cut before each use,
remove objects which can be thrown or
become entangled in the cutting blades.
Always hold the Hedge trimmer with both
hands and with the blade away from you
before turning it on.
always keep the power cord behind the
Hedge trimmer when in use. do not place
it over the hedge that you are trimming
en