Operation And Function - Sonnenkraft SKSC2 Manual Del Usuario

Operation and function

2. Operation and function
2.1 Pushbuttons for adjustment
Power connection must be established at fi rst.
The controller passes an initialisation phase. Af-
ter the initialisation the controller is in automatic
operation (factory settings). The preadjustet
system scheme is Arr 1.
The controller is now ready for operation and
ought to enable an optimum operation of the solar
system by the factory setting adjusted.
1
forward
The controller is operated by 3 pushbuttons below
the display.
SET
3
(selection / ad-
Pushbutton 1 is used for scrolling forward through
justment mode)
the index menu or for increasing adjustment
values. Pushbutton 2 is accordingly used for
2
backwards
contrary function.
In oder to get to the settings (adjustment chan-
nels), get to the last indication channel and then
keep button 1 pressed for about 2 seconds. If
an adjustment value is shown on the display,
SET is indicated. In this case you can press the
key „Set" (3) in order to change into input mode.
- select a channel by keys 1 and 2
- shortly press key 3, so that
- adjust the value by keys 1 and 2
- shortly press key 3, so that
permanently appears,
- the adjusted value is now saved.
fl ashes
11