Attaching The Wt-1 - Nikon WT-1 Manual De Usuario

Attaching the WT-1

1
Turn the camera on.
2
Before connecting the WT-1, set the USB option
in the camera setup menu to PTP.
3
Turn the camera off.
4
Remove the cover protecting the camera power
contact. The cover can be stored in the housing
on the WT-1.
5
Place the camera on the WT-1 and rotate the knob
in the direction shown to fasten the WT-1 to the
camera tripod mount.
6
Open the camera USB connector cover and con-
nect the USB cable to the USB connector.
7
Pass the cable over the guide on the BL-2 battery-
chamber cover.
4
SET UP
USB
Mass Storage
OK
PTP