Tabla de contenido
/
/
8
D I A G R A M A
S C H É M A
F I G U R E
V I
S E T T I N G T H E B I N D E R S T R I P
The alignment of the Binderstrip
is set by the position of the small metal positioning arm.The positioning
arm is located on the right end of the cool platen (figure 1 page 3).To
change or reset the Binderstrip
1.
Using a Philips head screwdriver, loosen the mounting screw of the
positioning arm (figure 8).
2.
Move the positioning arm in the direction and the same distance you
would like the Binderstrip
document.
3.
Tighten the mounting screw.
4.
Close the machine by pressing down on both sides of the cover until
the latch clicks and locks in position.
M O D E L
1 1 K E Y
O P E R A T O R
™
E N D P O S I T I O N
™
on the spine of a Fastbound
™
end location:
™
positioned on the spine of the Fastbound
'
S
M A N U A L
™
document
™
15
Tabla de contenido
