System Lay-Out; Technical Characteristics; Technical Data - RIB PRINCE 24V Manual Del Usuario

SYSTEM LAY-OUT

—
‚
š
1 - PRINCE operator
2 - Tuned aerial
3 - Flashing lamp
4 - Key selector
5 - Photoelectric cells (external)
˜
™
š ™
‚
1
T
ECHNICAL CHARACTERISTICS
PRINCE is a linear operator suitable for opening gates with a leaf
length of up to 2 meters and a weight of up to 200 Kg (Fig. 1).
The PRINCE operators use built-in mechanical stoppers, thus avoiding
the need for electrical limit switches.
PRINCE 24V PLUS is already equipped with a built-in Encoder to
sense obstacle while closing or opening. The Encoder permits the
proper stop at the end of travel for opening and closing.
On reaching the stopper, PRINCE 24V PLUS model stops
automatically following the command gived by the built-in Encoder.
N.B.: When installing PRINCE 24V it is advisable to instal an
electrical lock to ensure an efficient locking of the gate.
PRINCE 24V PLUS, owing to Encoder, is already equipped with
the ABIS (Anti Break-in System) function, to keep the gate closed.
TECHNICAL
DATA
Max. leaf length
Max. leaf weight
Max. travel
Average opening time
Operating speed
Power supply
Nominal Motor capacity
Max Motor capacity (blocked)
Nominal Power absorbed
Max Power absorbed (blocked)
Nominal Thrust force
Max Thrust force (blocked)
Normative cycles
Daily operations suggested
Service
Guaranteed consecutive cycles
Weight of electroreducer
Noise
Operating Temperature
Protection
** With incorporated mechanical stop that cuts in during opening. - If the
mechanical stop is used during closing (optional), the maximum
travel is reduced by 30 mm.
PRINCE 24V
m. 2
kg 200
mm 343**
s. 14
m/sec. 0,0134
24Vdc
W 12
W 89
A 0,88
A 3,72
N 1000
N 1500
n° ∞ - 14s/2s
n° 60
80%
n° 60/14s
Kg 10
db <70
°C -30 ÷ +55°C
IP 44
2
Measurements in mm
G G
B B