Technical Specifications - Telcoma Automations VEDO180 PRO Instrucciones De Uso

CHARACTERISTICS
VEDO180PRO, is a compact SYNCHRONISED photocell, simple and
quick to install. Thanks to the synchronisation system, up to eight pairs of
photocells can be used in the same system without the risk of interference.
The infra-red beam can be adjusted internally through more than 180°C
horizontally, to enable positioning even in points normally impossible for
standard photocells. Also the special self-centring lens compensates for
any errors of a few degrees vertically.
Power supply can be 24V AC or DC without polarity references.
IMPORTANT: other types of photocell cannot be used on the same
system using VEDO180PRO photocells. No other type of photocells
must be located in the operating range of VEDO180PRO photocells

TECHNICAL SPECIFICATIONS

Range
Power supply
Consumption Rx (max.)
Consumption Tx (max.)
Relay contacts max. current
Relay contacts max. voltage
Operating temperature
Protection class
Width
Length
Height
* The range is subject to the external environmental conditions. The
range can therefore be reduced by 70% in the presence of fog, dust or
rain.
m
Vac/Vdc
mA
mA
A
Vdc
°C
IP
mm
mm
mm
25*
24±10%
50
20
1
30
-20+55
44
44
102
37
GB
21