Cleaning And Maintenance - Beper 70.404 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
EN
USB essential Oil Diffuser Use instructions
USE:
• Remove the ceramic cover.
• Remove the water tank cover.
• Fill the tank with clean water, taking care not to exceed the maximum level indicated.
• Add essential oil to the water. It is recommended NOT to put more than 10-12 drops of oil in order not
to compromise the correct functioning of the product.
• Replace the tank lid and ceramic cover.
• Connect the USB cable to the socket on the base of the product (the product is equipped with a USB cable that
can be connected directly to a computer or by an adapter to the power outlet).
• When the water in the tank runs out the nebulization function will stop until the tank is refilled.
• It is possible to adjust the diffuser in this way:
Press the button
Once to turn on the product.
Twice to activate the mist emission continuously.
Three times to activate the mist emission intermittently (at intervals).
Four times to turn off the product.
Press the button
Once to activate cyclic lighting with alternation of long-lasting colours.
From the second touch it will be possible to select one of the colours and leave the lighting fixed.
After reviewing all the possible colours by pressing the light again, the light turn off.
It is also possible to select the cyclic illumination with a short-lasting colour alternation.

CLEANING AND MAINTENANCE:

WARNING! Always disconnect the power supply before performing maintenance!
Remove the ceramic cover.
Remove the tank cover.
Empty the water tank.
Wipe the outside of the appliance with a soft, slightly damp cloth.
Empty, rinse and dry the water tank with a clean cloth every time a different type of essential oil is used.
ATTENTION: THE TANK HAS A SPAUT SHAPE PART TO FACILITATE THE EMPTYING OF THE WATER.
During periods of non-use, store the appliance together with this manual in the original box in a dry and clean
place.
TECHNICAL DATA:
Input: 5V USB - 1A
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
9
Tabla de contenido
loading

Tabla de contenido