Fagoting; Cording - Janome MC 5200 Manual De Instrucciones

q
q
q

Fagoting

q Pattern:
w Presser foot:
e
e Thread tension:
w
Use this stitch to join two pieces of fabric to create an open
work appearance and add design interest.
Fold under each fabric edge 5/8˝ (1.5 cm) and press. Pin
the two edges to paper or tear away backing 1/8˝ (0.3 cm)
apart. Sew slowly, guiding the fabric so the needle catches
the folded edge on each side.
After finishing sewing, tear away the paper.

Cording

q Pattern:
e
w Presser foot:
e Thread tension:
w
3-strand cording
Insert 3 strands of cording under the spring of the foot and
draw them under the foot to the rear.
Hold the three strands parallel for even sewing and be sure
to sew over the strands.
Stitch slowly and smoothly, guiding the fabric as you sew.
q Spring
1-strand cording
Insert 1 strand of cording under the spring of the foot and
draw it under the foot to the rear (use the center slot of the
spring).
Select pattern #6 (mode 1), then decrease the stitch width
and sew.
110
#56, #77, #78, #85, #86 (mode 2)
Satin stitch foot F
AUTO
#29 (mode 2)
Cording foot H
AUTO