Cd Playing; Basic Operations - Aiwa CSD-MD5 Manual De Instrucciones

CD PLAYING

BASIC OPERATIONS

2
sSTOP
1
1
Press z CD EJECT to open the disc
compartment and place a disc on the tray with
the printed side up. Then close the disc
compartment by pressing z CD EJECT.
2
Press CD e to start play.
Track number
To stop play, press s STOP. CD s on the remote control
is also available.
To pause play, press CD e. To resume play, press
again.
To search for a particular point during play, keep r or
t pressed and release it at the desired point.
To skip to the beginning of a track, press r or t
repeatedly or turn JOG DIAL until the desired track is
displayed.
To remove the disc, press z CD EJECT.
To start play when the power is off
Press CD e. The power is turned on and play of the
loaded disc begins.
When z CD EJECT is pressed, the power is also turned on.
6
ENGLISH
r, t
RANDOM
REPEAT
DISP
JOG DIAL
r, t
Elapsed playing time
To check the remaining time
During play, press DISP repeatedly.
Each time it is pressed, the display changes cyclically.
1 Elapsed playing time of the track
2 Remaining time of the track
3 Remaining time of the disc
1 TRACK is lit up on the display.
2 TRACK and REMAIN are lit up on the display.
3 TOTAL and REMAIN are lit up on the display.
0-15, +10
You cannot check the remaining time of the disc when
RANDOM or " 1 is lit up.
CDs
To select a track with the remote control
Press the numbered buttons 0-15 and +10.
Example:
To select the 25th track, press +10 twice and 5.
To select the 20th track, press +10 twice and 0.
CD play starts from the selected track and continues to the
last track.
Display information in stop mode
NOTE
• Do not use irregular shaped CDs (example: heart-shaped,
octagonal ones).
• When loading an 8-cm (3-inch) disc, pull it on the inner
circle of the tray.
• Do not place more than one compact disc in the disc
compartment.
• Do not tilt the unit with disc loaded. Doing so may cause
malfunction.
↓
↓
↓
Total number of tracks
Total playing time