Tabla de contenido
Idiomas disponibles
Idiomas disponibles
- GB -
Access
Personality ID 1 (Operating mode 1)
DMX channel
Starting address + 0
Starting address + 1
Starting address + 2
Starting address + 3
Personality ID 2 (Operating mode 2)
DMX channel
DMX value range
Starting address + 0
100 ... 129
130 ... 149
150 ... 229
230 ... 255
Identify Device
To locate the unit within an installation, use the RDM command "Identify Device". If the identification is active (Identify
Device = 1), the unit triggers a visual effect. All outputs are switched continuously and simultaneously (on/off) in inter-
vals of 0.4 seconds.
• Identify Device = 0: Identification OFF
• Identify Device = 1: Identification ON
Monitoring
The operating status of the unit can be monitored via the RDM monitor of the controller. The layout of the RDM monitor
may vary depending on which RDM controller is used. As soon as a sensor value of the unit leaves the admissible
range of values, a corresponding note or error message is displayed in the field "Last Status Message".
Sensor values provided as responses by the unit (RDM):
No.
Sensor
1
Electronic Temperature
2
Temperature Error
3
Voltage
16
30539-10-13_GA_Underwater Switch16 16
Output
1
2
3
4
Output 1
0 ... 9
Off
10 ... 19
On
20 ... 29
Off
30 ... 39
Off
40 ... 49
Off
50 ... 99
Off
On
Off
Off
On
Comment
Temperature monitoring
If the operating temperature exceeds
the permissible range, the temperatu-
re error counter is increased.
Applied input voltage
Status
Off
On
Off
On
Off
On
Off
On
Output 2
Output 3
Off
Off
Off
Off
On
Off
Off
On
Off
Off
Off
Off
On
Off
Off
On
Off
Off
On
On
Permissible value
range
-20 °C ... +70 °C
Inadmissible operating temperature
0 ... 100
<> 0
Value below permissible range: "The input
21.6 V ... 28 V
voltage must be at least 21 V."
(approx. 24 V
Value range exceeded. "The input voltage
±10 %)
may not exceed 28 V."
29.10.2013 10:16:30
DMX value range
0 ... 127
128 ... 255
0 ... 127
128 ... 255
0 ... 127
128 ... 255
0 ... 127
128 ... 255
Output 4
Off
Off
Off
Off
On
Off
Off
On
Off
On
Error message
"Temperature error"
Tabla de contenido
