Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Technical data
Technical data
Power consumption
Cutter length
Cutting thickness
Total weight
Vibrations measured at handle*
Mains voltage
Insulation class
No-load stroke rate
Sound pressure level L
* The declared vibration total value has been measured in accordance with a standard test method and may be
used for comparing one tool with another. The declared vibration total value may also be used in a preliminary
assessment of exposure.
Safety instructions
General Power Tool Safety Warnings
Warning!
The vibration emission during actual use of the
power tool can differ from the declared total value
depending on the ways in which the tool is used.
Of the need to identify safety measures to protect
the operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
14
HT 440 Basic Cut
440 W
440 mm
16 mm
3,2 kg
2,2 m/s² (K = 1,5 m/s²)
230V~240V / 50Hz
/ II
1600 m
86 dB (A) (K = 1,5 dB (A))
PA
-1
Caution!
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
Caution - Risk of injury!
Safety/protection devices should not be disabled!
Caution - Danger of electrocution!
If the cable has been cut or is damaged, discon-
nect the plug from the mains supply immediately.
Caution!
Use the equipment only if it is in correct operating
condition! Before using, check the machine, cable
and plug for damage; any damaged parts must be
repaired or replaced at a specialised repair centre.
AL-KO Hedge trimmer
HT 550 Safety Cut
550 W
520 mm
18 mm
3,6 kg
2,9 m/s² (K = 1,5 m/s²)
230V~240V / 50Hz
/ II
-1
1600 m
86 dB(A) (K = 1,5 dB (A))
Translation of original user instructions
Capítulos
Tabla de contenido
