Tabla De Contenido - GreenWorks HM24L00 Manual Del Operador

1 Description......................................... 4
1.1 Purpose.............................................................. 4
1.2 Overview........................................................... 4
2 Introduction....................................... 4
3 General power tool safety
warnings............................................. 4
3.1 Work area safety................................................ 4
3.2 Electrical safety................................................. 4
3.3 Personal safety................................................... 4
3.4 Power tool use and care..................................... 5
3.5 Battery tool use and care................................... 5
3.6 Service............................................................... 5
3.7 Specific safety rules...........................................5
4 Proposition 65.................................... 6
5 Symbols on the product.................... 6
6 Risk levels...........................................6
7 Installation......................................... 7
7.1 Unpack the machine.......................................... 7
English
7.2 Install the battery pack.......................................7
7.3 Remove the battery pack................................... 7
7.4 Install the bit...................................................... 7
7.5
Remove the bit...................................................7
7.6 Install the auxiliary handle................................ 7
8 Operation........................................... 8
8.1 Start the machine............................................... 8
8.2 Stop the machine............................................... 8
8.3 Forward / reverse switch....................................8
8.4 Adjust the depth rod.......................................... 8
8.5 Select the mode..................................................9
8.6 Drill....................................................................9
8.7 Drill materials.................................................... 9
9 Maintenance.....................................10
9.1 Fit and change the SDS bit.............................. 10
9.2 Clean the machine........................................... 10
10 Technical data.................................. 10
11 Limited warranty............................ 10
12 Exploded view.................................. 11
3
EN