Kasanova LAN000007 8 Serie Manual De Instrucciones página 6

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

ELECTRIC MIXER
6
IMPORTANT
Read this user manual carefully before you use the appliance and
save it for future reference.
Never immerse the motor unit in water or any other liquid, nor rinse it
under the tap. Use only a moist cloth to clean the motor unit.
WARNING
Check if the voltage indicated on the appliance corresponds to the
local mains voltage before you connect the appliance.
If the mains cord is damaged, you must have it replaced by
KASANOVA, a service centre authorized by KASANOVA or similarly qualified
persons in order to avoid a hazard.
Do not use the appliance if the plug, the mains cord or other parts are
damaged.
Never use the blender jar or mill beaker to switch the appliance on
and off.
Never let the appliance run unattended.
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or metal capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
Do not touch the blades, especially when the appliance is plugged in.
The blades are very sharp.
If the blades get stuck, unplug the appliance before you remove the
ingredients that block the blades.
Never place the blade unit onto the motor unit if the blender jar or mill
beaker (specific types
only) is not or not properly attached to it.
Never reach into the blender jar with your fingers or an object while
the appliance is running.
Make sure the blade unit is securely fastened to the blender jar before
you assemble the blender jar onto the motor unit.
CAUTION
Always unplug the appliance before you assemble, disassemble or
make adjustments to any of the parts.
Always let the appliance cool down to room temperature after each
batch you process.
Never fill the blender jar with ingredients hotter than 80ºC.
To prevent spillage, do not put more than 1.25 litres of liquid in the
blender jar, especially when you process at a high speed. Do not put more
Tabla de contenido
loading

Tabla de contenido