Idiomas disponibles
Idiomas disponibles
EN
MAINTENANCE INSTRUCTIONS
All our awnings 'Made in Italy' and manufactured following high standards. Apart from our strict
quality controls, we also have our fabrics continuously controlled by inependent in stitutes to ensure
that the fabric is tear resistant, they can hold the weght of water, the colours don't fade and it is
resistent against atmospheric agents. In order to enjoy your awning for a long time, even for many
years after the purchase date, we ask you to take note of and follow the simple advices below:
MAINTENANCE INSTRUCTIONS FOR YOUR AWNINGS
1.
Basic guideline to clean the fabric of the awning and the Privacy-Room
Make sure that your awning is completely dry and clean before closing it.
The remaining humidity could cause stains. If however you have no choice but closing the awning
when it is still wet, make sure to open it for drying within 12 hours maximum.
Most of the dirt is superficial and can be removed with clean water and a cloth or a brush.
If the fabric is very dirty, add some light cleaning detergent. Be aware never to use any aggressive
chemical substances and never to clean the fabric with a high pressure machine.
We recommend not to use the awning at a temperature below 0°C.
2.
Additional information for the consumer
The awnings are made with precision, but some of the characteristics of the materials, which could
be interpreted as defects, derive from the materials and from the specific work processes, and these
characteristics occur even though Fiamma uses advanced and innovative machines production
techniques.
3.
The following characteristics are not grounds for reclamation:
!
To guarantee a perfect quality, the fabrics are waxed or laminated several times.
During this operation, single coloured pigments could move and thus create small bright spots in the
material, which are only irregularities that are technically inevitable to avoid, but do not influence the
impermeability of the fabric. The fabric is therefore completely hermetic, also in these spots.
!
During the production of the material, small creases could form, which especially on bright fabric in
backlight could seem dark. Bright stripes (the so called white crease) are inevitable with these
materials.
!
With time the influence of weather could cause change in colour.
We recommend the installation of the Shock Absorbers standard delivered (G).
Before using the Caravanstore, check with your local dealer, in order to be sure that the
wall of your caravan is sturdy enough.
Fiamma declines any responsibility for possible damages to lightweight walls caused
during the use.
®
20
®
