Service And Maintenance - Festool SYSLITE STL 450 Manual De Instrucciones Original

[3 E] Inclined surfaces -> 7.2 sec-
tion.
7.1 Setting device up for use at floor
level
The grazing light can be set up in two dif-
ferent positions [3 A]+[3 B].
7.2 Setting device up for use above
floor level
Only use the device together
with the Festool tripod ST
DUO 200 and the Festool
adapter AD-ST DUO 200
(some items not included).
Please follow the instructions contained
in the operating manual for the tripod
and the adapter.
Place the tripod on a dry, level and stable
surface. Fold out the tripod legs to the
limit stop.
Connecting the tripod and adapter [4]

Open the tripod to the limit stop.

Place the adapter in the required posi-
tion on the tripod up to the limit stop.

Turn the adapter until it clicks into
place.
Connecting the adapter and grazing
light [5]
Only fit the grazing light clip to the
marked area on the grazing light [5-1].

Insert the back of the grazing light into
the grazing light clip.
Positioning the grazing light [6]

Use the two rotary hinges to align the
grazing light in the direction of the tar-
get surface.

Adjust the height of the tripod.
8

Service and maintenance

Risk of injury, electric shock

Always pull the mains plug from the
socket before performing any servic-
ing and maintenance work!

All maintenance and repair work
which requires the housing to be
opened should always be carried out
by an authorised service workshop.
Customer service and repair
only by manufacturer or ser-
vice workshops: Find your
nearest address online at
www.festool.com/service
EKAT
Always use original Festool
4
spare parts! Order no. at:
5
3
2
1
www.festool.com/service
–Always clean the plastic cov-
er on the grazing light using a soft, dry
cloth and a mild cleaning agent to pre-
vent any damage. Do not use solvents.
9 Environment
STL 450
WARNING
Do not dispose of
the device in house-
hold waste! Recycle
devices, accessories
and packaging. Ob-
serve applicable na-
tional regulations.
GB
15