GBC MultiBind 208 Manual De Instrucciones página 5

Punching
Insert paper fully into the punching slot making sure
1
they are flush with the paper edge guide. (max 8
sheets 80gsm/1 x PVC Covers) (fig. 1).
Press down on the punching handle until all pages
2
are punched (fig. 2).
Lift handle to its original position and remove pages.
3
• When punching make sure the wire closing jaw is
in open position. Failing to do this will result in not
being able to punch through paper completely.
Comb binding
Place a comb (open side up) on the comb opener.
1
Pull down the punch handle to open the comb.
Once open fully lock the comb open using the comb
2
opening lock (see fig. 3).
Load your document onto the comb. Release the
3
comb opening lock to close the comb (see fig. 4).
Guarantee
Operation of this machine is guaranteed for two years
from date of purchase, subject to normal use. Within
the guarantee period, ACCO Brands Europe will at its
own discretion either repair or replace the defective
machine free of charge. Defects due to misuse or use
for inappropriate purposes are not covered under the
guarantee. Proof of date of purchase will be required.
Register this product online at www.accoeurope.com
Wire Binding
(using GBC 21 loop wires)
Using the edge of a desk feed the wire through the
1
punched document (fig. 5).
Using the wire closing guide, select the correct wire
2
closure by turning the left and right wire adjusters.
Insert the document into the wire closing jaws. (wire
3
opening face down) Support the document, then pull
down on the punch handle SLOWLY to close the wire
(fig. 6).
Lift the lever back to the vertical position and remove
4
the document.
Repairs or alterations made by persons not authorised
by ACCO Brands Europe will invalidate the guarantee.
It is our aim to ensure that our products perform to the
specifications stated. This guarantee does not affect
the legal rights which consumers have under applicable
national legislation governing the sale of goods.
G
5