Door Position For Start-Up Phase; Transmitter Memorizing And Erasing Process - Accessmatic cyborg Panther 1200 Manual De Usuario

1200
Opening your life

4.2 Door position for start-up phase

1. Use a commercial adaptor if the plug on the Panther 1200 Series unit does not correspond to the socket available.When the system is
powered up, check if the LED is ON.
2. Never cut or remove the cable supplied with the Panther 1200 Series garage opener. The power socket of
Panther 1200 garage opener connection must be tted by skilled and quali ed personnel in strict observan-
ce of current legislation, standards and regulations.
3. The power supply line must be protected from short circuits and ground leakage.
4. The garage door is recommeded to be set at half travel. This will ensure the leaf is free to move both during
opening and closure.

4.3 Transmitter memorizing and erasing process

A. Transmitter Memorizing:
Press "RF Learn" button for 3 seconds, and the LED display will show "CS"; then press the transmitter A button within 10 seconds; "CS" will
blink three times and stay ON After 10 seconds without any movement, "CS" will disappear The transmitter learning is completed.
B. Erasing Transmitter Memory:
Press and hold "RF Learn" button for 10 seconds, the display will show "CS". When "CC" is displayed, the memory is cleared.
15