weasy HVP10 Manual De Usuario página 9

5. gently press the fabric brush against the garment, moving your arm in an up and down motion
targeting creases in the fabric.
6. release the steam button to stop the steam.
NOTE: ensure that the fabric to be steamed is being stretched whilst steaming for best results.
WARNING: the garment steamer generates high temperatures of steam. do not touch the steam
head, make sure the steamer is facing away from you in an upright position.
7. if using the garment steamer without the fabric brush, keep a distance of at least 5cm between
the steam head and the garment.
To steam curtains
1. wash and dry curtains as directed, according to the fabric type.
2. hang the curtains and steam when they are hanging in place.
3. lightly stretch the curtain with one hand while steaming to help remove creases more easily.
To steam upholstery
1. the garment steamer can be used to help freshen up upholstery, slip covers on furniture and
cushions from the furniture and in the room. before steaming, always test on a small area of the
fabric that is not visible.
2. keeping the garment steamer in an upright position and using and up and down motion. lightly
steam over the fabric of your furniture. cushions should be removed and held upright for
steaming. allow cushions to dry thoroughly before replacing on furniture.
NOTE: it is recommended that you use the fabric brush attachment when steaming delicate fabrics
such as silk, this will minimise the garment whilst steaming. for better result when removing
stubborn creases, remove the fabric brush attachment from the steam head and continuously
steam over the selected area until creases are removed.
WARNING: if garment has metal accessories, be cautious and do not have garment steamer
directly over the metal as this may discolour the metal.
WARNING: always unplug the garment steamer before attaching or detaching the fabric brush.
NOTE: only use attachments or accessories provided.
NOTE: if the unit becomes noisy with a loud humming sound and no steam is being generated,
check the water level in the water tank. this may indicate that the garment steamer is out of water
and needs to be refilled.
WARNING: do not use the garment steamer directly on the body, animals, or while wearing the
garments.
After each use
l press the power button , switch the power off at the power outlet and disconnect the power
cord from the power outlet.
l Open the water tank inlet and (over a sink or bucket) invert the water tank to empty the
remaining water from the tank.
l Stand the garment steamer on its base, in an upright position, and allow to cool.