JBSYSTEMS Light SCANMASTER 1612 Manual De Instrucciones página 4

ENGLISH
5. OVERRIDE BUTTON: When a chase is running, you can select 1 or more fixtures
and control them independently from the chase running at that moment.
6. SPEED SLIDER: Used to select the chase speed within a range of 0.1seconds to
10minutes.
7. FADE TIME SLIDER: Used to adjust the fade time within a range of 0 to 30sec.
8. LCD DISPLAY: Shows the current activity or programming state. The LCD Display
contains 2 lines of 8 characters each. Below is a list of abbreviations used:
LCD DISPLAY
•
SN1
•
BK1
•
CHASE1
•
STEP 009
•
DATA 184
•
SP:1m34s
•
FT:3.31s
•
ASS04 05
•
RES10 13
9. JOYSTICK PAN: Used to control the panning (horizontal movements) of the
selected fixture(s)
10. JOYSTICK TILT: Used to control the tilt (up/down movements) of the selected
fixture(s)
11. PROGRAM BUTTON: Used to enter or leave the program mode.
12. MIDI/RECORD BUTTON: Used to record actions in memory or to set a MIDI
channel.
13. AUTO/DELETE BUTTON:
• Running mode: Used to switch between manual and automatic chase mode.
• Program mode: Used to delete scenes or chases.
14. MUSIC/BANK COPY BUTTON:
• Running mode: Used to switch between manual and music chase mode.
• Program mode: Used to copy banks.
15. BANK UP/DOWN BUTTON: Used to select one of the 30 banks or to select one of
the steps in a chase.
16. TAP/DISPLAY BUTTON: Used to select different display modes.
Used to change the readout of the channel DMX-values: you can change between
real DMX-values (0
Also used as TAP-function in auto chase mode to set the chase speed: tap the
button twice with a certain time interval. (alternative to the speed fader)
17. BLACKOUT BUTTON: Used to stop all DMX output.
18. CHASE BUTTON: Used to activate one or more chases.
19. FINE BUTTON: Used to control the PAN/TILT functions of a fixture with the
smallest increment. This gives you the possibility to position the fixtures with high
precision. (sometimes using the channel faders can give you even better results)
20. MODE: Pushing Mode and Fine buttons together activates joystick assign and
channel reverse modes.
JB SYSTEMS
FULL MESSAGE
scene1 is active
bank1 is active
chase1 is active
step 9 of a chase
DMX-value the last fader used = 184 (0 255)
Speed is set to 1minute and 34 seconds.
Fade time is set to 3,31seconds
Joystick is assigned to channels 4 & 5 (PAN=4 * TILT=5)
DMX channels 10 & 13 are reversed
255) or values in percentage (0
3/68
OPERATION MANUAL
100%)
SCANMASTER 1612 (SM-1612)