JBSYSTEMS Light SCANMASTER 1612 Manual De Instrucciones página 12

ENGLISH
PLAYBACK OF SCENES
There are three modes in which you can playback scenes:
1. Manual Mode: You can select and show one or more scenes manually.
a. When the power is turned on, the unit starts automatically in manual mode.
b. Check if the Manual mode LED is lit.
c. Check the blackout button and verify that the LED is not lit, if it is, press it once
to exit blackout mode.
d. Use the Bank Up/down button to select the bank with the scenes you wish to
run.
e. Press the scene button corresponding to the scene you wish to display.
f. Eventually repeat steps d and e to select others scenes.
2. Auto Mode: You can run a bank of programmed scenes in sequence. You can
use the Manual override button, see further for more information.
a. Press the Auto/Del button to enter into Auto mode. The Auto LED turns on.
b. Use the bank Up/Down button to select a bank of scenes to run.
c. After selecting the bank of scenes to run, you can use the speed slider and
Fade Time slider to adjust the speed of the scene progression.
d. You can use the TAP/Display button to set the speed instead. The time between
the last two taps equals the length of time between steps. This setting will stay
in effect until the speed slider is moved.
e. Press the Auto/Display button to exit Auto mode.
3. Music Mode: You can run a bank of programmed scenes to the beat of the music.
You can use the internal microphone or add an external music signal. You can use
the Manual override button, see further for more information.
a. Press the Music/Bank copy button to activate Music mode. The Music LED
turns on.
b. Use the bank Up/Down button to select a bank of scenes you wish to run. The
scenes selected will run through sequentially to the beat of the music.
c. Press the Music/Bank Copy button again to exit music mode.
PLAYBACK OF CHASES
There are three modes in which you can playback chases:
1. Manual Mode: You can select and show a chase manually.
a. When the power is turned on, the unit starts automatically in manual mode.
b. Check if the Manual mode LED is lit.
c. Check the blackout button and verify that the LED is not lit, if it is, press it once
to exit blackout mode.
d. Select the chase you want to use. The LCD display shows the chase number.
e. Press the TAP/Display button, the LCD display now shows the STEP-numbers
of the selected chase.
f. Use the Bank Up/down buttons to manually show the different steps of the
chase.
JB SYSTEMS 11/68 SCANMASTER 1612 (SM-1612)
OPERATION MANUAL