INFORMAZIONE AGLI UTENTI
Ai sensi dell'art. 13 del decreto legislativo 25 luglio 2005, n.151 "Attuazione delle Direttive 2002/95/CE, 2002/96/CE e 2003/108/CE, relative alla riduzione dell'uso di
sostanze pericolose nelle apparecchiature elettriche ed elettroniche, nonché allo smaltimento dei rifiuti".
Il simbolo del cassonetto barrato riportato sulle apparecchiature indica che il prodotto alla fine della propria vita utile deve essere raccolto separatamente dagli altri rifiuti.
L'utente dovrà, pertanto, conferire l'apparecchiatura giunta a fine vita agli idonei centri di raccolta differenziata dei rifiuti elettronici ed elettrotecnici, oppure riconsegnarla
al rivenditore al momento dell'acquisto di una nuova apparecchiatura di tipo equivalente, in ragione di uno a uno. L'adeguata raccolta differenziata per l'avvio successivo
dell'apparecchiatura dismessa al riciclaggio, al trattamento e allo smaltimento ambientalmente compatibile contribuisce ad evitare possibili effetti negativi sull'ambiente
e sulla salute e favorisce il riciclo dei materiali di cui è composta l'apparecchiatura. Lo smaltimento abusivo del
prodotto da parte dell'utente comporta l'applicazione delle sanzioni amministrative di cui al dlgs. n.22/1997 (articolo 50 e seguenti del dlgs. n.22/1997).
All articles displaying this symbol on the body, packaging or instruction manual of same, must not be thrown away into normal disposal bins but brought to specialized
waste disposal centres. Here, the various materials will be divided by characteristics and recycles, thus making an important contribution to environmental protection.
Alle Artikel, die auf der Verpackung oder der Gebrauchanweisung dieses Symbol tragen, dürfen nicht in den normalen Mülltonnen entsorgt werden, sondern müssen an
gesonderten Sammelstellen abgegeben werden. Dort werden die Materialien entsprechend ihrer Eigenschaften getrennt und, um einen Beitrag zum Umweltschutz zu
liefern, wiederverwertet.
Todos los artículos que exhiban este símbolo en el cuerpo del producto, en el embalaje o en el manual de instrucciones del mismo, no deben ser desechados junto a los re-
siduos urbanos normales sino que deben ser depositados en los centros de recogida especializados. En estos centros, los materiales se dividirán en base a sus características
y serán reciclados, para así poder contribuir de manera importante a la protección y conservación del medio ambiente.
Tous les articles présentant ce symbole sur le corps, l' e mballage ou le manuel d'utilisation de celui-ci ne doivent pas être jetés dans des poubelles normales mais être
amenés dans des centres de traitement spécialisés. Là, les différents matériaux seront séparés par caractéristiques et recyclés, permettant ainsi de contribuer à la protection
de l' e nvironnement.
Todos os artigos que apresentem este símbolo no seu corpo, embalagem ou manual de instruções, não devem ser eliminados juntamente com o lixo normal mas sim
conduzidos para contentores de eliminação de resíduos especializados. Aqui, os diversos materiais serão divididos por características e reciclados, realizando assim uma
importante contribuição para a protecção ambiental.
Όλα τα προϊόντα στα οποία εμφανίζεται το ακόλουθο σύμβολο στο σώμα, τη συσκευασία ή το εγχειρίδιο χρήσης τους, δεν πρέπει να εναποθέτονται στους κοινούς
κάδους απορριμάτων αλλά να προσκομίζονται στα ειδικά κέντρα αποκομιδής. Εκεί, τα διάφορα υλικά θα πρέπει να διαχωρίζονται ανάλογα με τα χαρακτηριστικά και τα
ανακυκλούμενα υκλικά, συμμετέχοντας έτσι ουσιαστικά στην προστασία του περιβάλλοντος.
Alle artikels die dit symbool weergeven op de behuizing, verpakking of instructiehandleiding ervan, mogen niet weggegooid worden in normale vuilnisemmers maar
moeten naar speciale afvalverwerkingscentra gebracht worden. Hier worden de verschillende materialen verdeeld volgens eigenschappen en recyclage waardoor een
belangrijke bijdrage aan de milieubescherming wordt geleverd.
Kaikki tuotteet, joissa on tämä merkintä tuotteessa itsessään, sen pakkauksessa tai käyttöoppaassa, tulee hävittää ainoastaan tarkoitukseen varatuissa kierrätyskeskuksis-
sa. Siellä eri materiaalit erotellaan ominaisuuksiensa ja kierrätystapansa mukaan, millä on tärkeä merkitys ympäristönsuojelussa.
10 - Midland BT Remote
EC Certificate of Conformity
(to EC Directive 99/5 -2004/108- 2006/95/EC)
DECLARATION OF CONFORMITY N° 2012032102 Rev 1
Manufacturer:
C.T.E. International S.r.l.
Address:
Via Sevardi 7 – ZONA INDUSTRIALE MANCASALE – 42124 REGGIO EMILIA
Products Name:
BT REMOTE
WIRELESS REMOTE SYSTEM
Product Type:
Brand :
MIDLAND
The product described above is in conformity with the following Specifications based on sample testing:
Item of
Standard
Title
99/05/CE
Audio, video and similar electronic apparatus - Safety requirements
3.1a
EN 60065 :2002
+ A2:2010 +
A12 :2011
Electromagnetic compatibility and Radio spectrum Matters (ERM);
3.1b
EN 301 489-1
Electromagnetic Compatibility (EMC) standard for radio equipment and
services; Part 1: Common technical requirements
Electromagnetic compatibility and Radio spectrum Matters (ERM);
3.1b
EN 301 489-17
Electromagnetic Compatibility (EMC) standard for radio equipment; Part
17: Specific conditions for Broadband Data Transmission Systems
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Wideband transmission systems; Data transmission equipment operating
3.2
EN 300 328
in the 2,4 GHz ISM band and using wide band modulation techniques;
Harmonized EN covering essential requirements under article 3.2 of the
R&TTE Directive
Supplementary information to the conformity assessment result on which the declaration is based:
Conformity assessment procedures are referred to art. 10(4) linked with Annex III of Directive 1999/5/ec.
The test sample fullfils the requirements specified above, on the basis of test result and their evaluation.
The product herewith complies with the essential requirements of EC Directive 99/05/EC, 2004/108/EC and
following implements and modifications, 2006/95/EC and following implements and modifications, 93/97/EC.
Reference to any marking or other indication (e.g. on the product) is exhibited in attachment to this
declaration.
Reggio Emilia, 21/03/2012
This document is owned by Cte International srl. It is forbiddeen to reproduce or diffuse it without the authorisation of the Quality
Assurance Manager of CTE International srl.
DO:
7.1.4.4
Rev:
5
Authorised on: 02/02/2010
By :
S. Peterlini
Signature
Edition
or date of
issue
2011
V.1.8.1
V.2.1.1
V1.7.1
CTE International srl
Quality Assurance Manager
Peterlini Stefano
Midland BT Remote - 11
