Cleaning And Care; Overheating Protection Circuit - Unold 86525 Instrucciones De Uso

25. To switch off the appliance, press the ON/OFF button and switch the main
switch on the rear of the appliance to "0".
Be aware that the appliance can become very hot – danger of burns!
Particularly ensure that children are kept away from the appliance.

CLEANING AND CARE

1. Never use any abrasive scouring agents, steel wool,
metal objects, hot cleaning agents or disinfectants.
2. To clean the filter, open the filter cover. Remove the
filter and clean it with warm water that must not be
hotter than 30°C.
3. Allow the filter to dry completely, before you reinsert
it. Then carefully close the filter cover.
4. You can remove dust in the appliance if you carefully
hold a vacuum cleaner against the air outlet grille
or air inlet grille.
5. Store the fan heater in a dry, safe place so that it
is protected from dust, shocks, heat and moisture.

OVERHEATING PROTECTION CIRCUIT

1. The appliance is equipped with an overheating protection circuit that
switches the appliance off when it is heated over 70° C.
2. If the overheating protection circuit has been tripped, switch the appliance
off, unplug the plug from the electrical outlet and let the appliance cool for
at least 30 minutes.
3. Eliminate the cause of the overheating, (e.g. excessive dust in the appli-
ance, air outlet grille is covered) and start up the appliance again.
4. If after eliminating the cause, you still cannot switch the appliance back
on, or if the overheating protection circuit switches on without an apparent
reason, contact our customer service organisation.
28
Copyright UNOLD AG | www.unold.de
Switch off the appliance.
Unplug the plug from the electrical outlet.
Allow the appliance to cool completely.