Input........................................................................................18V, DC only
Speed.............................................................................................130 MPH
Tube Length........................................................................................20 in.
Weight.................................................................................................5.8 lb.
FRONT BLOWER
TUBE
-
One speed switch – On/Off – Snap on tube – Rubber Over Molded Handle -
Problem
Unit does not run
Battery will not charge
FEATURES
Product specifications
HANDLE
REAR BLOWER
TROUBLESHOOTING
Possible Causes
-
Battery not making contact
-
Batter not installed properly
-
Battery not charged
-
Battery not inserted into
charger
-
Charger not plugged in
-
Surrounding air temperature too
hot or cold
6
BATTERY
PACK
TUBE
Possible Solution
-
Check battery is full inserted
-
Check that battery is securely
connected to the blower
-
Check battery charging requirements
-
Insert battery into charger until LED
appears.
-
Plug in charger into a working outlet.
-
Check current at receptacle by plugging
in lamp or another appliance.
-
Check to see if receptacle is connect to
a light switch which turns off the power
when you turn out the lights
-
Move charger and tool to a
surrounding air temperature of above
40 degrees F (4.5 degrees C) or below
105 degrees F (+40.5 degrees C)
TRIGGER
SWITCH