VQ OrthoCare BioniCare Hand System Manual De Instrucciones página 18

BioniCare Hand System
®
Troubleshooting (cont.)
Problem: Battery will not hold a charge.
Your signal generator may display a "Low Battery" indication. Keep track
of how long the battery lasts during one treatment session. If the battery
lasts eight hours or more, the battery is functioning normally. Remember
to charge both batteries initially for at least 4 hours; be sure the battery
charger is not plugged into an outlet controlled by a light switch. Keep
one battery charging at all times; you may want to label your batteries A
& B and keep track of which battery you use for each treatment. If you're
travelling overseas be sure to get a converter/adapter for the charger.
Problem: Display is blank and the Signal Generator shuts off.
If your Generator shuts off, you may have accidentally turned it off.
If you can turn on the Generator normally then this is most likely the
problem. If the Generator does not turn back on, it might mean the
battery has completely discharged and has turned off normally. Plug in
a recharged battery and check the user time. Eight hours of treatment is
normal. Additionally, be sure to hold down the On/Off button for about
one second; if the button is not pressed long enough the Generator will
not turn on. The best way to know you're doing it right is to wait for BioniCare
logo to display, then let go of the On/Off button.
16