Basic Operation; Front Panel; Rear Panel - Phasak PH 7266 Manual De Uso

3. Basic operation

EN

FRONT PANEL

1.
Power Switch:
Press the switch for 2 seconds to turn the UPS ON or OFF.
Alarm setting: The audible alarm can be turned OFF or ON
by quickly pressing the POWER button twice. The default
setting is for the Alarm On. To turn the Alarm Off, quickly
press the power button twice. You will hear two short beeps
when the Alarm is turned off. To turn the Alarm back on,
quickly press the power button twice. You will hear a single
short beep when the Alarm is turned on.
2. LED indicators:
This LED is illuminated when the UPS is working.

REAR PANEL

3. Input Power Cord:
Cabo para ligar a uma tomada para fornecer energia á
UPS.
4. AC outlet:
A UPS tem conectores para suporte de energia, para
equipamentos conectados, para garantir uma operação
ininterrupta temporária durante uma falha de energia e
contra picos de corrente ou sobrecargas.
5. Input Circuit Breaker:
The circuit breaker provides overload protection..
6. SCHUKO Connector with system:
Schuko connector with surge protection, without UPS
battery power support. In this connector you can connect
an equipment for protection only against over voltage such
as LCD, Laser printer, etc.
20
PH 7266 | PH 7288 | PH 7210
Uninterruptable Power Supply
1
2
3
4
PH 7266
PH 7288
5
6
PH 7210
Segurança e harmonia
ININTERRUPTA