Drill Safety Warnings; Additional Safety Warnings; Standard Accessories - HIKOKI D 13 Instrucciones De Manejo

DRILL SAFETY WARNINGS

1. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
2. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord.
Cutting accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and could
give the operator an electric shock.

ADDITIONAL SAFETY WARNINGS

1. Ensure that the power source to be utilized conforms
to the power requirements specifi ed on the product
nameplate.
2. Ensure that the power switch is in the OFF position.
If the plug is connected to a receptacle while the power
switch is in the ON position, the power tool will start
operating immediately, which could cause a serious
accident.
3. When the work area is removed from the power source,
use an extension cord of suffi cient thickness and rated
capacity. The extension cord should be kept as short as
practicable.
4. Never wear gloves during operation.
Gloves are sometimes caught by rotating parts, resulting
in serious injury. Do not use gloves during operation.
5. Install the side handle and hold the tool fi rmly with both
hands.
One-hand operation is very dangerous. Always install the
side handle and hold the tool with both hands. Holding
the tool insuffi ciently can result in serious damage during
operation.
6. Hold the main handle by your right hand.
Holding the main handle by your left hand may make the
switch be unintentionally locked.
7. Pressure
Drilling will NOT be accelerated by placing heavy
pressure on the drill. Such action will only result in a
damaged drill bit, decreased drilling effi ciency, and/or
shortened service life of the drill.
8. The larger the drill bit diameter, the larger the reactive
force on your arm. Be careful not to lose control of the
drill because of this reactive force. To maintain fi rm
control, establish a good foothold, hold the drill tightly
with both hands, and ensure that the drill is vertical to the
material being drilled.
9. When the drill bit bores completely through the
material, careless handing often results in broken drill
bit or damage to the drill body itself due to the sudden
movement of the drill.
Always be alert and ready to release pushing force when
drilling through the material.
10 Never change the direction of rotation while the motor is
rotating. Turn the power switch off before changing the
direction of rotation.
11. Precautions on boring
The drill bit may become overheated during operation;
however, it is suffi ciently operable. Do not cool the drill
bit in water or oil.
12. Caution concerning immediately after use
Immediately after use, while it is still revolving, if the Drill
is placed on a location where considerable ground chips
and dust have accumulated, dust may occasionally be
absorbed into the drill mechanism. Always pay attention
to this undesirable possibility.
13. RCD
The use of a residual current device with a rated residual
current of 30 mA or less at all times is recommended.
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
D13 : Drill
Read all safety warnings and all instructions.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2002/96/
EC on waste electrical and electronic equipment
and its implementation in accordance with
national law, electric tools that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
V Rated voltage
P Power input
n
No-load speed
0
Switching ON
Switching OFF
Lock
Switch locks to the "ON" position.
Disconnect mains plug from electrical outlet
Class II tool

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package contains the
accessories listed in the below.
○ Chuck wrench ........................................................... 1
○ Side handle ............................................................... 1
Standard accessories are subject to change without notice.
APPLICATIONS
Drilling in metal, lumber and plastics.
3
English