Fitting Carrying Eye (Clamp); Mounting The Loop Handle - Stihl BF Manual De Instrucciones

English / USA
Fitting Carrying Eye
(Clamp)
1
1
2
Carrying ring is country-specific.
: For position of carrying eye (clamp)
see "Mounting the Loop Handle".
: Position the clamp (1) so that the
tapped hole is on the left-hand side
of the drive tube (viewed from
powerhead).
: Squeeze the ends of the clamp
together and hold it that position.
: Insert M 6 x 14 screw (2).
: Line up the carrying eye.
: Tighten down the screw.
16

Mounting the Loop Handle

A
2
1
Position of Loop Handle
: Fit the loop handle (1) on the drive
tube approx. 10" / 25 cm (A) forward
of the control handle (2).
3
4
Position of Carrying Ring
The carrying ring (3) must be mounted
on the drive tube in front of the control
handle.
Position of Sleeve
The sliding sleeve (4) on the drive tube
serves as a spacer.
: Slide the sleeve (4) up to the
carrying ring.
Position of Handle Hose (SP 81)
A sliding handle hose (4) is fitted on the
drive tube of the STIHL SP 81.
: Slide the handle hose (4) up to the
carrying ring.
BF, BK