Charging The Battery; Powering On/Off; Locking/Unlocking The Screen And Keys - ZTE Velox Guía De Usuario

Charging the battery

When you first get your new tablet you'll need to charge the battery . If the
battery is low, there will be a pop-up message on the screen . As you charge
your tablet, the screen will tell you the exact battery level each time you
wake up your tablet .
WARNING! Use only ZTE-approved chargers and cables . The use of
unapproved accessories could damage your tablet or cause the battery
to explode .
1 . Insert the charger's connector into the charging port . Be sure to insert the
connector in the correct orientation . Do not force the connector into the
port .
2 . Plug the charger to a standard AC wall outlet . If the tablet is on, you'll see
a charging icon, such as or
3 . When the battery is fully charged, unplug the charger and disconnect it
from the tablet .
12
, in the Status and notification bar .
GETTING STARTED

Powering on/off

• Press and hold the Power/lock key to turn on your tablet .
• To turn it off, press and hold the Power/lock key to open the options
menu . Tap Power off > OK .

Locking/unlocking the screen and keys

Your tablet allows you to quickly lock the screen and keys (put the tablet into
Sleep Mode) when not in use and to turn the screen back on and unlock it
when you need it .
Locking the screen and keys
To quickly turn the screen off and lock the keys, press the Power/lock key .
Note: To save battery power, the tablet automatically turns off the screen
after a certain period of time when you leave it idle . You will still be able to
receive messages while the tablet screen is off .
Unlocking the screen and keys
1 . Press the Power/lock key to turn the screen on .
2 . Tap and hold the icon on the screen .
Note: If you have set an unlock pattern, PIN, or password for your tablet
(see Personalization – Protecting your tablet with screen locks), you'll need
to draw the pattern or enter the PIN/password to unlock your screen .
GETTING STARTED 13