Replacement Of The Pilot Light Injector - Angelo Po 1G0GRG Manual De Uso

REPLACEMENT OF THE PILOT LIGHT INJECTOR

To carry out this operation, proceed as follows.
1 - Turn off the gas supply tap.
2 - Access the pilot light through the opening pro-
vided in the bottom of the appliance.
3 - Unscrew the union (A).
4 - Remove the nozzle (B) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
5 - Retighten the union (A).
DECOMMISSIONING AND SCRAPPING THE APPLIANCE
When decommissioning the appliance, a series of
procedures must be carried out to ensure that
the appliance and its components are not a
hindrance and are not easily accessible.
To ensure that the appliance cannot constitute
hazards for people or the environment, all energy
sources (electricity, etc.) must be disconnected and
rendered unusable, and any liquids present must
be drained (lubricants, fluids, etc.).
Place the appliance in a suitable area which is not
easily accessible, with barriers to prevent anyone
IT
GB
DE
FR
ES
English
A
B
from accessing it.
When scrapping, sort all components by chemical
characteristics and dispose of them separately in
accordance with the relevant legal requirements.
Important
Do not dump non-biodegradable products,
lubricating oils, and non-metallic compo-
nents (rubber, PVC, resins, etc.) in the envi-
ronment. Dispose of them in compliance
with the relevant laws.
- 20 -
IDM-39604003800.tif