Maintenance Chart; Storage - Intertek Efco MT2200 Manual De Instrucciones

I
Please note that the following maintenance intervals apply for
normal operating conditions only. If your daily work requires
longer than normal or harsh cutting conditions are present the
GB
suggested intervals should be shortened accordingly.
Complete Machine
F
Controls (on/off switch,
safety button)
Chain Brake
D
Oil Tank
E
Chain Lubrication
Saw Chain
SK
Guide Bar
P
GR
Rim Sprocket
TR
All Accessible Screws
and Nuts
CZ
Motor crankcase
louvers
Battery
RUS
UK

9. STORAGE

PL
WA R N I N G ! Al s o re a d t h e b at t e r y
and battery charger instruction and
maintenance manual!
If the machine is to be stored for long periods:
- Remove the battery (read also the battery
manual, which contains information for
correct battery storage).
- Follow all the maintenance regulations
described above.
32

MAINTENANCE CHART

Inspect (Leaks, Cracks, and Wear)
Check Operation
Check Operation
Check by Dealer
Inspect (Leaks, Cracks, and Wear)
Check operation
Inspect (Damage, Sharpness, and
Wear)
Check Tension
Sharpen (Check Gauge Depth)
Inspect (Damage, and Wear)
Clean Bar groove and Oil Passages
Rotate, Lubricate Sprocket Nose and
Deburr
Replace
Inspect (Damage, and Wear)
Inspect - Retighten
Clean
Inspect (Damage, and Wear)
X X
X X
X X
X X
X X
X X
X X
X X
X
X
- Completely empty the tank of chain
lubricant and close the cap
- Run the machine empty to completely
empty also the delivery pipe and the oil
pump.
- Clean the saw thoroughly.
- Put the blade-cover on. Store the saw in a
dry place, preferably off the ground, and
away from heat sources.
X
X
X
X
Replace with
X
every new
chain
X
X