Use - Intertek Efco MT2200 Manual De Instrucciones

WARNING – Whenever you use the
chain saw, first check to ensure that
I
releasing the trigger stops the chain and
motor in a matter of seconds. Periodically
have the correct stopping time checked by
an Authorized Service Centre.
GB
Do not put the electric saw on the
ground when the chain is still moving.
F

7. USE

D
SAFETY DEVICE
CHAIN BRAKE
The chain brake ensures maximum safety in
E
using the electric saw. It protects the operator
from dangerous kickback which can occur
during working phases. It is actuated, with
SK
consequent instant locking of the chain, when
the operator presses the lever (Fig. 17).
The chain brake is released by pulling the
lever towards the operator (Fig. 4) only after
P
having completely released the starting switch
(B, Fig. 16).
GR
CHECKING BRAKE OPERATION
At machine inspection prior to each job, check
the operating condition of the brake following
TR
the steps below:
1. Start the engine and grasp the handle
securely with both hands.
2. Pulling the throttle lever to maintain the
CZ
chain operation, push the brake lever down
toward the front using the back of your left
hand (Fig. 17).
RUS
UK
3. When the brake operates and the chain is
stopped, release the throttle lever.
4. Release the brake (Fig. 4).
PL
USI PROHIBITED USE
WARNING - Always follow the safety
regulations. The electric saw must only
be used for cutting wood. It is forbidden to
cut other types of material. Vibrations and
kickback vary with different materials and
the requirements of the safety regulations
would not be respected. Do not use the
28
electric saw as a lever for lifting, moving
or splitting objects. Do not lock it over
fixed stands. It is prohibited to fit tools or
attachments to the power take-off of the
electric saw, other than those indicated by
the manufacturer; the operator could suffer
serious injury.
If using the electric chainsaw for the first time,
gain confidence by making a few practice cuts
on a firmly held log, under the supervision of an
expert user. Never push down on the saw when
cutting. The weight of the saw alone enables it
to cut properly with minimum effort obtaining
the best performance.
WARNING - Do not use for sawing
in the rain, or in wet or very humid
environments (the power saw is not water
proofed), when visibility is poor or in very
high or low temperatures.
OPERATING INSTRUCTIONS
WA R N I N G ! Al s o re a d t h e b at t e r y
and battery charger instruction and
maintenance manual!
WARNING - Tree filling is a task that
requires experience. Not groped tree
filling if you are inexperienced. AVOID ALL
TRANSACTIONS FOR WHICH YOU ARE NOT
QUALIFIED! If using the electric chain saw
for the first time make a few practice cuts on
a stably positioned limb to gain confidence
and safety awareness before proceeding. Do
not press down with the electric chain saw
excessively; the mere weight of the tool will
be sufficient to make the cut with minimum
effort.
WARNING - Never cut in high wind, bad
weather, when visibility is poor or in
very high or low temperatures. Always check
the tree for dead branches which could fall
during the felling operation.
TREE FELLING
In tree filling and bucking operations exploit