Brief Introduction; Safety Instructions - ViewSonic VPAD10 Guia Del Usuario

Brief introduction

Safety Instructions

Use the following safety guidelines to help protect yourself and VPAD10.
• Do not attempt to service the VPAD10 yourself. Always follow installation instructions closely.
• Be sure that nothing rests on the AC adapter's power cable and that the cable is not located where it can be tripped over
or stepped on.
• Do not cover the AC adaptor with papers or other items that will reduce cooling; also, do not use the AC adapter while it is
inside a carrying case.
• Use only the AC adapter, power cord, and batteries that area proved for use with this VPAD10. Use of another type of
battery or AC adapter may cause risk of fire or explosion.
• If you use an extension cable with the AC adapter, ensure that the total ampere rating of the products plugged in to the
extension cable does not exceed the ampere rating of the extension cable.
• When you move the VPAD10 between environments with very different temperature and/or humidity ranges, condensation
may form on or within the VPAD10. To avoid damaging the VPAD10, allow sufficient time for the moisture to evaporate
before using the VPAD10.
• When you disconnect a cable, pull on its connector or on its strain relief loop, not on the cable itself. As you pull out the
connector, keep it evenly aligned to avoid bending any connector pins. Also, before you connect a cable make sure both
connectors are correctly oriented and aligned.
This guide shown may vary from Actual products, please follow the actual products.
ViewSonic
viii
VPAD10