EN
36
• Before descaling the appliance, remove the mains plug from the wall socket and
wait until the appliance has cooled down
• Do not immerse the appliance in water or any other liquids.
• Make sure that the grinding function is not activated when descaling the appliance.
To start the descaling process:
1
Open the cover (24).
2
If necessary, empty the water reservoir (14).
3
Remove the carbon filter holder (20) from the water reservoir (14).
4
Fill the water reservoir (14) with a suitable descaling agent.
5
Place the coffee pot (16) on the storage plate (18).
6
Insert the mains plug into the wall socket.
7
Switch on the appliance by pressing the on/off button (1).
8
Let the appliance run until
9
Switch off the appliance by pressing the on/off button (1).
10 Let the descaling agent work for approximately 30 minutes.
1 1 Switch on the appliance by pressing the on/off button (1).
12 Let the appliance run until the remaining descaling agent is in the coffee pot (16).
The appliance stops automatically when the water reservoir (14) is empty.
Rinse the appliance twice according to the below procedure:
1
Fill the water reservoir (14) with clean water up to the maximum mark on the water
level indicator (15).
2
Place the empty coffee pot (16) on the storage plate (18).
3
Switch on the appliance by pressing the on/off button (1).
4
Let all water run through the appliance. The appliance stops automatically when the
water reservoir (14) is empty.
After descaling:
1
Place the carbon filter holder (20) in the water reservoir (14).
2
Close the cover (24).
3
Switch off the appliance by pressing the on/off button (1).
4
Keep the coffee quantity selector (3) and the coffee strength selector (4) pressed
until the indicator (D) disappears from the display (8) (fig. C).
5
Clean the outside of the appliance with a damp cloth. Dry the outside of the
appliance with a clean, dry cloth.
6
The appliance is ready for use.
⁄
of the descaling agent is in the coffee pot (16).
1
3