Use - Glatz ALU-SMART Manual De Instrucciones Y Opciones

Use

Slider
Tilt lock
Upper pole
Lower pole
* depending on the fabric class, either separate or
sewn onto the cover
1
Click
Supporting rods
Belt*
Cover
Clamping screw
Shade base
(optional)
Open shade
Remove the protective cover, if present
1. Loosen the belt
2. Pull the supporting rods outwards
slightly
3. Slide the slider upwards
4. Slider engages audibly above
!
The slider must engage audibly above.
Ensure that the area around the shade
is free of obstacles.
36 37
2.3
2.2
3.3
Click
2
Adjust the shade height
When adjusting the shade height, keep a
firm hold on the upper pole, to prevent it
lowering accidentally.
1. Hold upper pole firmly
2. Loosen clamping screw
3. Adjust shade height to suit
4. Tighten the clamping screw
2.4
3
Tilt the shade canopy
When adjusting the shade height, keep
a firm hold on the moving part of the
upper pole, to prevent it tipping over
accidentally.
3.2
1. Hold moving part firmly
2. Push tilt lock in completely
3. Tilt shade
4
Close shade
1. Shade canopy in an upright position
2. Unlatch the slider downwards
3. Pull the slider downwards
4. Fix/wrap the cover
5. Attach the belt
i
If required, pull over the protective
cover (shade must be dry).
!
The tilt-lock must audibly engage
when putting the sunshade in upright
position!