Power Dynamics PDC-60 Manual De Instrucciones página 4

7. REPEAT BUTTON
Use this button to repeat one track or all the track of the CD.
8. RELOOP BUTTON
This button is used to start the last saved loop. To finish the loop, press the reloop button again.
9. LOOP IN BUTTON
This button sets the beginning of the loop. The Loop indicator on the display flashes.
10. LOOP OUT BUTTON
When you press this button, you set the end point of the seamless loop and you start the loop. Press this button again to
finish the loop.
11. SINGLE BUTTON
Press this button to switch between the SINGLE and CONTINUOUS play modes. The selected mode is indicated on the
LCD. In SINGLE mode, the unit stops reading after each track. In CONTINUOUS mode the unit reads all tracks and stops.
12. PROG BUTTON
In STOP mode, you can program several tracks (20 tracks max):
- Press the STOP button to enter stop mode.
- Press the PROG button to enter program mode.
- Use the skip track buttons to choose the track you want to listen to then press the PROG button to enter your choice.
- Use one more time the skip track buttons to choose the track you want to listen then press the PROG button to enter your
choice.
- Repeat the operation to select all the track you want to listen.
- Press the play / pause button to start the playback.
13. TRACK +10 BUTTON
Use this button to jump 10 tracks in one press.
14. SKIP I<< BUTTON
Use this switch to restart the track or to select the last track.
15. SKIP >>I BUTTON
Use this button to select the next track.
16. PITCH BEND – BUTTON
The pitch will drop while the - button is being pressed and returns to the original pitch when it is released.
17. PITCH BEND + BUTTON
The pitch will automatically rise when the + button is being pressed and will return to the original pitch when it is released.
18. USB PORT
Supports USB playing and you may also connect the computer with the USB cable but only when USB work mode is
entered.
19. DISC-TRAY
To be able to enter the disc press EJECT button (2).
20. CD / USB DISPLAY
Displays menus and the current operating status.
21. REMOTE SENSOR
This sensor receives the infrared information from the remote control. Don't place any object or sticker in front of the sensor.
22. FM / DAB+ BUTTON
Press to change between playing DAB+ and FM modes.
23. MENU BUTTON
Press to enter FM / DAB+ menu mode. If the user does not select any item by pressing ENTER knob, it will return to FM /
DAB+ playing after several seconds.
FM menus consist of "Audio setting" and "System".
"Audio setting"
a. Forced mono: As a stereo signal becomes weaker the audio signal will become poorer. It may be preferable to force the
radio to play the station in mono in order to reduce the level of audio noise.
b. Stereo allowed: "St" indicator on LCD display means that the current station is played as stereo.
"System"
a. Time setup: There are 4 sub-items in time setup menu,
Set clock: While the digit flashing, use "-","+" or TUNING knob to set hour and minute. Press ENTER to confirm.
Set date: While the digit flashing, use "-","+" or TUNING knob to set date, day and year. Press ENTER to confirm.
Auto update: Press ENTER to update the firmware automatically.
Set 12/24 hours: enter to switch between the 12-hour and 24-hour formats.
b. Factory reset: If you select "Yes", a full reset will be performed. The station list and presets will be erased.
c. SW version: If you select the item, it shows the software version for several seconds.
4