Vacuum Packing With Film From The Roll - Unold 48090 Instrucciones De Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 42
Copyright UNOLD AG | www.unold.de
5.
Close the cover and press the two catches on the right and
left of the appliance inward at the same time.
6.
Press the button "Vac Seal". The indicator lamp lights up
green to indicate that vacuum packing is in progress.
7.
When the optimal vacuum result has been achieved, the
bag is sealed.
8.
The appliance starts with sealing, the vacuum pump no
longer works.
9.
When the process is completed, the indicator lights go
out.
10. Now open the lid and remove the bag.
11. The vacuum packing process is completed and the food in
the bag is vacuum sealed.
12. If you only wish to seal the bag without a vacuum, just
press the button "Seal".
13. If you wish to interrupt the vacuum packing process, press
the button "Vac Seal" again.
14. Always check whether the vacuum result meets your
requirements and ensure that the sealing strip is com-
plete and flawless.

VACUUM PACKING WITH FILM FROM THE ROLL

1.
Prepare the appliance as described in the section "Pre-
paring the appliance for operation".
2.
Open the cover of the appliance. Check to make sure the
seal is inserted properly. If there are any foreign objects
such as crumbs on the seal, they have to be removed,
since otherwise no vacuum can be created.
3.
Cut the required amount of film from the roll. Caution:
Add at least 7.5 cm for vacuum packing. If you wish to
reuse the bag, you have to add even more: allow 2.5 cm
for each vacuum packing process.
4.
Place one open end of the film over the sealing gasket.
You do not have to insert this end of the bag into the
vacuum packing chamber, since the bag first has only to
be sealed, without creating a vacuum.
5.
Close the cover and press the two catches on the right and
left of the appliance inward at the same time.
6.
Press the button „Seal". The indicator lamp lights up
red to indicate that the appliance is sealing. The vacuum
pump is still off.
7.
When the process is completed, the indicator lights go
out.
8.
Open the lid and remove the bag.
9.
Now you can start vacuum packing, as described.
10. If you wish to interrupt the vacuum packing process, press
the button "Vac Seal".
19
Tabla de contenido
loading

Tabla de contenido