Adjusting The Boundary Range: Warning Area And Stimulation Area - Num'axes Canifugue Small Manual De Instrucciones

• Activate/deactivate the receiver collar
The supplied magnetic key allows you to activate/deactivate the collar.
• Activate: move the magnetic key towards the collar so that it comes into contact with the
hold for 1 second (ref. Diagram 5). The collar will emit one beep sound and the indicator light will flash in green indicating
the collar is On.
• Deactivate: move the magnetic key towards the collar so that it comes into contact with the
collar, hold for 1 second (ref. Diagram 5). The collar will emit two beep sounds and the indicator light will flash in red then
go out indicating the collar is Off.
To increase the battery life, we recommend you to deactivate the collar if you are not using it for a long period.
If your dog needs to leave the authorized area, you have to remove the collar or deactivate the transmitter by disconnecting
it from the power supply.
Diagram 6
Activate/deactivate
the receiver collar
with the magnetic key

Adjusting the boundary range: warning area and stimulation area

•
Adjustment buttons on the transmitter enable you to increase or decrease the width of the warning and stimulation zones
depending on the configuration of your yard and how the wire is laid.
The width of the warning zone is adjustable by using the central button located on the front of the transmitter (ref. Diagram 1).
The warning zone is adjustable from 40 cm to 6 m (approx.) on each side of the wire. A graduation from 0 to 10 helps you to
define the width of the zone according to your needs (0 = approx. 40 cm – 10 = approx.6 m).
The stimulation zone is adjustable by using the 3-position button located on the front of the transmitter (ref. Diagram 1).
Diagram 5
Charge of the battery
on the charging station
25
symbol located on the collar,
symbol located on the