Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Temperature, humidity, or air
pressure is incorrect
CARE OF YOUR WEATHER STATION
1.
Do not expose the unit to extreme temperature, water or direct sunlight.
2.
Avoid contact with any corrosive materials.
3.
Do not subject the unit to excessive force, dust or humidity.
4.
Do not open the inner back case or tamper with any components of this unit.
CLEANING YOUR WEATHER STATION
To clean the weather station, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth
lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzene
or thinner, as these might damage the surface of the unit.
SPECIFICATIONS:
Temperature Range
Indoor
+14°F to +122°F (-10°C to +50°C) (display shows HH.H / LL.L if out of this range)
Outdoor
-58°F to +158°F (-50°C to +70°C) (display shows HH.H / LL.L if out of this range)
Humidity Range
Indoor
Outdoor
Temperature Resolution
RH% Resolution
Temperature & Humidity
Air Pressure Range
Alarm Duration
Snooze Duration
weather station (default setting is "CH1" – Channel 1)
4.
Observe if the Low Battery icon appears on the left of
the outdoor temperature. If yes, replace batteries in
transmitter with fresh batteries.
5.
Make sure no other interfering sources are being
used (such as computer monitors, TV sets,
headphones, or speakers) in the path of the signal
from the transmitter. The signal travels in a straight
line; an electrical source near that "line" may cause
interference.
1.
Press RESET on the main unit.
2.
Make sure your main unit and the transmitter is away
from sources of heat / cold / direct sunshine.
20% - 95%
20% - 95%
0.2°F / 0.1°C
1%
measure every 30 seconds
850 hPa to 1050 hPa
2 minutes
5 minutes
Kesa Electricals© UK: EC1N 6TE 04-04-2012
EN.9
Tabla de contenido
