Associated Standards And Regulations - RSLAB LJL002 Manual De Uso

Rocking Shaker & 3D Shaker
Fuels
•
Before using other method for cleaning or
decontamination, the user must ascertain with the
manufacturer that this method will not damage the
instrument. Wear the proper protective gloves during
cleaning of the instrument.
Note:
•
Electronic device cannot clean with
cleanser.
•
If you require maintenance service, must
be cleaned the instrument in advance to
avoid pollution of hazardous substances,
and to send back into original packing.
•
If the instrument will not use for a long
time, please switch off and place in a dry,
clean, room temperature and stable
location.
8.

Associated standards and regulations

Construction in accordance with the following safety
standards:
Water containing
tenside
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority
NOTE: This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may
18
EN 61010-1
UL 3101-1
CAN/CSA C22.2(1010-1)
EN 61010-2-10
Construction in accordance with the following EMC
standards:
EN 61326-1
to operate the equipment.