Display; Operation - RSLAB LJL002 Manual De Uso

Rocking Shaker & 3D Shaker
Table 2

4.2 Display

Set
Set
Err
Faults
Figure 3
Display Descriptions
Set Display when set target value.
Err Display in case of error happening.
Display area When
setting value; When
this area shows running value.
Table 3
Display
Set display, this area shows
Set disappears,

5. Operation

•
Place the instrument in safe and stable surface, ensure
the required operating voltage and power supply
voltage matched, and the socket must be earthed
reliably.
•
Connect the power cable.
•
Switch ON instrument.
•
The instrument begins self-checking.
•
When initialization is over, LCD displays the last
running values of speed.
•
Rotate the speed control knob to set target speed.
a. Press the speed control knob to start shaking
function. Press the speed control knob again to stop
shaking function.
b. Rotate the timer control knob to set target time.
Press the timer control button to start shaking
function at the set speed and time. During operation,
motion can be stopped at any time by pressing the
speed control knob or timer control knob. If the timer
control knob is pressed again, the shaking function
will start again and the timer will restart countdown.
When the timer reaches zero, the unit will be
16