Troubleshooting: Digital Scale - Model 15S Only; Switch Lock; Optional Accessories; Replacement Parts - Powermatic 15S Instrucciones De Funcionamiento Y Manual De Piezas

Troubleshooting: Digital Scale – Model 15S only
Trouble
Flashing digits.
Locked digits.
No display.
Displays only '0000'.
Function buttons
won't work.

Switch Lock

To safeguard your machine from unauthorized operation and to avoid accidental starting by young
children, the use of a padlock (not provided) is highly recommended.
To lock out an on/off switch (Figure 43):
1. Open the padlock.
2. Insert through holes in the start button.
3. Close the padlock.
4. Store padlock key in a safe place.

Optional Accessories

708816 Knives (set of 3) – Model 15S only
15S-600 Battery for digital scale – Model 15S only
15S-601 Battery cover – Model 15S only
1791212 Knife Inserts (set of 10) – Model 15HH only
708520 DRO Retrofit Kit

Replacement Parts

Replacement parts are listed on the following pages. To order parts or reach our service department, call
1-800-274-6848, Monday through Friday (see our website for business hours, www.powermatic.com).
Having the Model Number and Serial Number of your machine available when you call will allow us to
serve you quickly and accurately.
Probable Cause
Low voltage.
Haphazard memory.
Poor contact of battery.
Low voltage.
Short-circuit of zero setting spring and
slider signal source.
Distortion of springs from over-
pressing.
Remedy
Replace battery.
Take battery out, wait thirty seconds,
then re-insert it.
Improve battery contact.
Replace battery.
Remove frame and adjust spring.
Remove frame and adjust springs.
26
Figure 43