GBC Photo A4 Manual De Instrucciones página 5

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
Specifications
Electrical
Machine Dimensions
Machine Weight
Maximum Pouch Width
Maximum Pouch Thickness
Warm-Up Time
Operation
Connect power cord to appropriate power source.
Choose the right temperature setting (1)
1
GBC Photo A4 Lamintor is designed for 2 x 75 mic or
2x80 mic (Total 150 mic or 160 mic)
The laminator has 2 temperature settings:
- Copy : to be used with Copy Paper
- Photo : to be used with Photo Paper
Push the On/Off switch to "On." The red "Power" indicator
2
lamp will illuminate (2).
Select the right setting (Copy or Photo). The "Ready"
3
indicator lamp will glow green when the laminator reaches
lamination temperature (3).
Position the document to be laminated into a GBC 2 x 75
4
micron (Total 150 micron) laminating pouch, so that the
document is aligned to the sealed edge of the pouch (4).
5
Insert the pouch into the machine with the sealed edge
first (5).
6
The laminated item will automatically exit at the rear of
the pouch laminator. After the pouch has stopped moving,
place it on a flat surface to cool for one minute before
handling (6).
7
If you have finished laminating, then move the switch to
the "off" position.
Do not laminate an empty pouch.
GBC Photo A4 Laminator
220-240 V / 50Hz / 1.1A / 250-260W
360 x 81 x 133mm
1.6kg
242mm
2 x 75mic. TOTAL 150
(compatible with 2 x 80mic.)
4 minutes
Personal Paper Trimmer
Blade Knob
Paper Guide
Specifications
Sheet Cutting Capacity 80g/m
2
Cutting Guide
Cutting Length
Dimensions
Weight
NOTE: Please retain this information regarding safe
operation of this paper trimmer.
CAUTION: Sharp blade, do not touch the edge of the
blade.
CAUTION: Close supervision is required when this
product is used near children.
Operating the Trimmer
Place the trimmer on a stable, flat surface.
1
Slide the blade knob (1) to either end of the ruler.
2
Place material to be trimmed at the desired position using
3
transparent paper guide (2) and hold material securely in
place with left hand. Grid pattern and scale can be used
for allignment.
You can cut in both directions by sliding down on cutting
4
knob assembly with right hand.
Cut laminated sheet (75 or 80 micron) 1 sheet at a time.
5
Cutting Restrictions
• Remove staples, paper clips, etc. before cutting.
• Do not cut metal film or film containing glass, etc.
• Do not cut more sheets than capacity allows.
• Trimmer should be operated by an adult or under adult
supervision.
• Do not carry trimmer by holding onto the cutting blade
handle.
• Always operate trimmer with both hands on a stable base
or desk.
• Do not touch the edge of the blade.
Personal Paper Trimmer
1-5 sheets
Inches and Centimeters
12" / 305mm
423 x 129 x 37mm
0.226kg
5
Tabla de contenido
loading

Tabla de contenido