If the power supply cord or mains plug is
N
damaged or defective it must be repaired by
an authorised repair agent in order to avoid a
hazard. Do not cut the power supply cord and
do not attempt to repair it yourself.
Never attempt to remove or replace any parts
N
other than those specified in this manual.
ELECTRICAL SAFETY
Before use, check that the mains voltage
N
corresponds to the voltage on the rating plate.
This appliance is double insulated in
accordance with EN 60335-2-14; therefore
no earth wire is required.
To avoid the risk of electric shock, do not
immerse the cord, plug or motor unit in
water or other liquid.
ASSEMBLY
Before assembly, make sure that the
appliance is switched off and unplugged.
Choosing beaters or dough hooks
Use beaters for mixing, beating, whipping and
N
creaming liquids and mixtures.
Use dough hooks for mixing and kneading
N
dough.
Fitting the beaters or dough hooks
Switch the appliance off.
N
Insert the stem of a beater or dough hook into
N
one of the mounting holes in the motor unit.
Push and turn the beater or dough hook until
N
in locks into place.
N
Repeat for the other beater or dough hook.
Removing the beaters or dough hooks
Switch the appliance off.
N
Keep the release button depressed.
N
N
Pull the beaters or dough hooks out of the
motor unit.
USE
To switch on, slide the speed control switch to
N
one of the positions 1 (lowest speed) to 5
(highest speed). It is recommended to start at
a low speed, then change to a higher speed if
necessary.
To switch off, slide the switch to position 0.
N
Do not operate the appliance
N
continuously for more than 10 minutes.
After operating the appliance
continuously for 10 minutes, let it cool
down for at least 10 minutes before
operating it again.
When working with liquids, use a low
N
speed in order to avoid splashing liquid
onto the appliance.
N
Firmly hold the container that you are
using with the mixer.
CLEANING AND MAINTENANCE
Before cleaning and maintenance,
switch the appliance off and unplug it.
N
Wash the beaters and dough hooks in warm
soapy water and dry well.
Wipe the motor unit with a damp cloth. Do not
N
use any abrasive or solvent-based cleaner.
Do not immerse the motor unit in water or
any other liquid.
PROTECTING THE ENVIRONMENT
Black & Decker provides a facility for
recycling Black & Decker products once
they have reached the end of their
working life. This service is provided free
of charge. To take advantage of this
service please return your product to any
authorised repair agent who will collect
them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
Black & Decker office at the address indicated in
this manual.
E N G L I S H
5