Cepex CPC004 Instrucciones De Instalación Y Operación página 16

PROGRAMING
4.2.3 Programing the Controller for Multi-valve - (Program A, B, C)
• To select an irrigation program A, B, and C, or the X program, switch the selector to the
weekly/cyclic/even-odd mode.
• One of the three programs will appear on the display – press the Pr button until the program
you are interested in appears, for example A together with the word Off. (The X sign will
also appear – the Support program. We will look at this program in Section 4.3.4 on page24).
• In order to activate the program in the operational manner you require, select one out of
the these three modes : Weekly –
button – .
• By pressing – - weekly program A -
• By pressing again on -
• By pressing again on –
• By pressing again on –
• By pressing again on –
PLEASE NOTE
From this stage on, the controller has to be programed according to the method
of activation selected - weekly: Section 4.2.4; cyclical: Section 4.2.5; even-odd:
Section 4.2.6.
– Cyclic –
- is selected.
– cyclic program A -
– even-days of the month program A - – is selected
– odd-days of the month program A – – is selected
– program A is shut down – OFF. The program is then inactive.
– Even-odd – – by pressing
- is selected
1
4
EN