Lubrication; Lubrication Schedule - Husqvarna MZ54 Manual Del Operador

LUBRICATION

Lubrication Schedule

*
12/12 Every year
1/52 Every Week
1/365 Every day
 Change engine oil every 50 hours
General
Remove the ignition key to prevent unintentional
movements during lubrication.
When lubricating with an oil can, it must be fi lled
with engine oil.
When lubricating with grease, unless otherwise
stated, use high grade molybdenum disulphide
grease.
For daily use, the machine must be lubricated
twice weekly.
Wipe away excess grease after lubrication.
It is important to avoid getting lubricant on the
belts or the drive surfaces on the belt pulleys.
If this happens, clean them with spirits. If the
belt continues to slip after cleaning, it must be
replaced. Gasoline or other petroleum products
must not be used to clean belts.
Initial hydraulic oil and fi lter change
at 100 hrs, every 400 hrs thereafter
IMPORTANT INFORMATION Use minimal
lubrication and remove excess lubricant so that
is does not come into contact with belts or belt
pulley drive surfaces.
under pressure can have suffi cient force to
penetrate the skin, causing serious injury. If
injured by escaping fl uid, see a doctor at once.
Serious infection or reaction can develop if
proper medical treatment is not administered
immediately.
Lubricate with grease gun
Filter change
Oil change
Level check
WARNING! Escaping hydraulic oil
29