AL-KO HWA 4000 comfort Manual De Instrucciones página 20

en
Pump runs in normal operation
ON X
PRESSURE
2.0 BAR
ON X
FLOW
3300 L/H
Rotating X after ON symbolises pump is ON
Pump in automatic mode, not pumping
Display indicator
AUTO 0
FLOW
0 L/H
AUTO 0
PRESSURE
4.0 BAR
0 after AUTO symbolises pump off
Displaying flow rates
The following information can be displayed by pressing the MODE key both during operation (ON)
and in AUTO status.
Display indicator
AUTO 0
TOTAL VO
98 m3
AUTO 0
VOLUME SU
12.5 m3
Press the MODE button to switch between displaying the pressure and through-flow as well as flow
rate.
20
Pump is switched on and is
pumping water.
Pressure is displayed.
Pump is switched on and is
pumping water.
Pressure is displayed.
Switching condition
Pump is switched on but is
not pumping water.
No through-flow; 0 l/h is
displayed.
Pump is switched on but is
not pumping water.
Pressure is displayed.
Switching condition
Displays the volume of
water already conveyed.
Displays the volume of
water already pumped.
Function / actions
Pump starts automatically when pressure line is
opened (valves, spray nozzles, water tap, etc.).
Pump starts automatically when pressure line is
opened (valves, spray nozzles, water tap, etc.).
Function / actions
Press the SET button to reset to zero.
Display indications
HWA 4000 /4500 / 6000-5